3.09.2004
Well, the hydraulic clutch project is on hold for the time-being. I've got the mechanical linkage working pretty well, for now, so I'm going to wait until it's time to I pull the transmission for the overhaul.
I haven't decided, but I'm still leaning towards a master-slave setup, especially if I can find a still-available stock slave that is meant to work with an 833 bell-housing. If so, I could consider creating a kit for other people to do this retrofit. The advantage over a hydraulic throwout bearing is that you don't have to pull the trans to service the slave cylinder, and you can do the install with the trans still in place.
It could be a real no-brainer if I can just find the right slave cylinder....
I haven't decided, but I'm still leaning towards a master-slave setup, especially if I can find a still-available stock slave that is meant to work with an 833 bell-housing. If so, I could consider creating a kit for other people to do this retrofit. The advantage over a hydraulic throwout bearing is that you don't have to pull the trans to service the slave cylinder, and you can do the install with the trans still in place.
It could be a real no-brainer if I can just find the right slave cylinder....
# posted by ultrajosh @ 8:29 AM 
